The WAH Series has been designed for corrosive and abrasive slurries.

A short overhang on the shaft assists with shaft deflection as well as vibration.

Dimensionally interchangeable to suit heavy-duty bearing assemblies.

Ease of maintenance design allows interchangeability with high-chrome, elastomer and various other material options.

Various impeller designs to suit any application.

Impeller adjustment via bearing assembly.

Expulsion vanes on the impeller shroud minimise the recirculation and reduce pressure in the stuffing box.

Available in various materials to suit any application.

Fine erosive and abrasive products can be pumped using natural rubber

Max tip speed – 27,48m/s

Max particle size – 10mm

Natural Rubber can handle a pH range of 2-14 at 23 degrees

General Processing

Mill Circuit

Coal Processing

Power Industry

Wet Crushers

SAG Mil Discharge

Ni Acid Slurry

Coarse Sand

Coarse Tailings

Phosphate Matrix

Minerals Concentrate

Oil Sands

Mineral Sands

Pulp and Paper

Mild corrosive slurries can be pumped using 27 %Chrome.

Max tip speed – 34.5m/s

Max particle size is limited by the impeller passage.

Superb wear resistance to erosive/abrasive products with particle sizes greater than 0.1 in diameter, provided by 27% chrome.

Products consisting of Nitric (HN03J and Sulphuric(H2S04) acids within a PH range of 5 to 12 can be pumped successfully using 27% Chrome.